The hottest Terex topneng powerlift8000 shoes

Terex toponeng powerlift8000 crawler crane serves Fujian noer

Terex toponeng powerlift8000 crawler crane serves Fujian noer

China Construction machinery information

Guide: in July, in the sunny sunshine and sea breeze in Zhangzhou City, Fujian Province, on the port hoisting equipment assembly site of noer hoisting equipment (China) Co., Ltd, A group of assembly workers and several construction machinery and equipment surround a behemoth Noel STS series shore bridge crane and are busy with it

in July, the sun was shining in Zhangzhou City, Fujian Province, and the sea breeze was blowing. On the port hoisting equipment assembly site of noel hoisting equipment (China) Co., Ltd., a group of assembly workers and several engineering machinery and equipment were surrounding a behemoth, Noel STS series shore bridge cranes, and were busy and orderly assembling them. Among the equipment in operation is a powerlift8000 crawler crane (with a lifting capacity of 360 tons) from Terex TOPONE (Shandong) Heavy Machinery Manufacturing Co., Ltd. (hereinafter referred to as Terex TOPONE), which was introduced in 2011 and is the lifting equipment with the largest lifting capacity used by Noel factory so far

its rated pressure is adjusted through the overflow valve. Powerlift 8000 crawler crane is lifting and installing the front girder of this STS series shore bridge crane. The girder weighs 100 tons and is 60 meters long. The maximum lifting height is 40 meters during assembly. The whole hoisting adopts powerlift 8000 as the main crane and another auxiliary crane. The two equipment cooperate closely to complete the whole hoisting task. In this hoisting project, powerlift 8000 adopts the configuration of 66m main boom, 132t counterweight +40t center counterweight, and rope threading ratio of 12. It is reported that it will take about 2 months for the whole quayside crane to be assembled, during which powerlift 8000 will continue to provide hoisting services for the company

the master in charge of the shore bridge crane assembly on site said that the powerlift8000 crawler crane of Terex topneng has been stable, safe and reliable since its use. Since the construction in September, 2011, RTG series tire gantry cranes have been hoisted and assembled for many times

Noel lifting equipment (China) Co., Ltd. is one of the joint ventures under Terex, and has grown into one of the most important container handling equipment manufacturing bases in the world. RTG tire gantry crane and STS shore bridge crane produced by the enterprise have become a reliable choice for the majority of container port equipment users

about Terex toptronics (Shandong) Heavy Machinery Manufacturing Co., Ltd. (hereinafter referred to as Terex toptronics)

Terex group is a fortune 500 enterprise that has invested in China for more than 20 years. It has five business divisions, including cranes, construction machinery, aerial work platforms, material handling, material transfer and port solutions. Terex topneng is subordinate to the crane business department of Terex group. In 2010, Terex acquired 65% of the shares of Shandong topneng Heavy Machinery Manufacturing Co., Ltd. and established Terex topneng (Shandong) Heavy Machinery Manufacturing Co., Ltd. as Terex's global production base of small crawler cranes. The company currently designs and manufactures crawler cranes of 70 to 360 tons

about powerlift 8000 crawler crane

powerlift 8000 high purity aluminum alloy products with a rated lifting capacity of 3 companies have high strength and light weight of 60 tons. With the crawler expansion function, the crawler can be contracted to 5.2m, which reduces the requirements for the width of the road and is conducive to the transfer between units in the process of wind power construction; When the crawler is running, pushing the handle forward is moving forward, realizing the function that the travel direction is always the same as the direction of the cab; The counterweight translation function solves the problem that the lifting of 2.0MW unit must adopt the scheme of super lifting working condition. At the same time, through the movement of the counterweight, the whole machine can be lifted by itself; The dismounting oil cylinder and counterweight translation oil cylinder can be operated by wireless remote controller or manually; Super lift working condition and tower working condition are reserved for the whole machine to meet the use requirements of general crawler cranes; The cable of the whole machine adopts pull plate structure, which is convenient for installation and transportation